+86 18925518137
Casa » Productos » Luz de marcador LED » Luces de marcador laterales LED » Luz de marcador de liquidación automática de 12V impermeable de 12V

categoria de producto

Este producto ha sido fuera de la plataforma!

loading

Compartir con:
sharethis sharing button

Luz de marcador de liquidación automática de 12V impermeable de 12V

Waterproof 12V Auto Led Clearance Marker Light ,made by PC lens with Chrome Bezel.Suitble for every car you want.
Estado de Disponibilidad:
  • Bd-003w03snd-z

  • Bowang

Led Qty3PCS Super Flux LED 
Voltaje12V
Energía0.17W
Dimensión106*34MM
Temperatura de trabajo-40℃~75℃
ColorWhite light+Yellow shell

Características:
Fácil de instalar.

long-lasting and durable.
Waterproof, reliable and safe.

Yellow with Chrome Base.

Surface Mount Ready.

Fits for most Buses / Trucks / Trailers / Lorries,etc.


Describir:

*2.5\" Inch Mini Oval Amber Side Marker Light 3 LED with Chrome Bezel. The lens is made from Polycarbonate (PC Lens) .

Fully sealed submersion IP67 rated that can go the distance.

With a unique chrome bezel, our single LED clearance lights stand out from the crowd.

Designed the clearance lights as universal as possible.

The Marker Light Can be Used as Side Marker Lights, Indicator Lights, Trailer Light, Exterior Lights, Identification Lights, Clearance Lights, etc. 

You can modify wherever you want and fit on your Truck, Trailer, Lorry, Caravan, Bus, RV, ATV, Van, etc.

Easy to Install with screws ; Black is Positive and White is Negative. You can place the lights on the flat surfaces wherever on your Trucks.


RFQ:

Q:Have regular lights for these led lights,plug and play?

A: They will replace your current lights if they are the same suze.There do not come with any kind of \"plug\" connector.Only a red and black wire to be connected to positive and negative 12 V respectively.


Q:Is the light plug and play?

A:Yes,we have two style of the lights.One is plug and play,the other is wire to wire connect.

Q:Is it difficult to wire them to your lights?

A:It's easy to install.you just know the positive wire and ground wire,and then connect the right wire together.


Q:how to installation?

A:For Special car lights, you can use it in plug and play.

And the universal lights,you need to hole the car to ensure the screw position,and then wire to wire to connect.


Q:Do they have a rubber seal to keep the rain out?

A: Don’t worry,the light have waterproof,and there is no any issues with water getting in them.


Q:Is there a gasket included?

A:Some lights can be use without gasket.

Q:When i went from regular bulb to led the signal light won’t blink?

A:Pls check your wiring because i went from a regular bulb to led on both tail light and the gate light and all the lights work fine.


Anterior: 
Siguiente: 

ENLACE RÁPIDO

Dongguan Bowang fotoeléctrico
+ 86-0769-81099632
+86 18925518137
2021-09-08
Las luces de conducción LED son un tipo de luminaria, pero su propósito es diferente de la de las lámparas convencionales.
2021-03-01
Fundada en 2009, Dongguan Bowang Photoelectric CO., LTD. se ha convertido en una empresa de alta tecnología que integra la I + D
 
 
© Copyright Dongguan Bowang Photoelectric CO., LTD. 2021. Todos los derechos reservados.粤 ICP 备 2021050601 号